Filter
Top Products
42
Function menus (continued)
<HOME> (continued)
Status display 1
*1: This status is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz (HD or SD) mode has been selected as the
system menu item No.25 (SYSTEM FREQ) setting.
*2: This status is not displayed when the 59/60 Hz or 50 Hz mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
VTR Description of settings
PB Playback format
This displays the format
used for playback.
1080i LP
These settings indicate the DVCPRO HD-LP recording and playback mode.
720p LP
1080i SP
These settings indicate the DVCPRO HD-SP playback mode.
720p SP
50M These settings indicate the DVCPRO (50 Mbps format) playback mode.
<Note>
In the case of “50Mp”, the format can be determined; however, images and audio will
not play back properly.
50Mp
25M
These settings indicate the DVCPRO (25 Mbps format), DV and DVCAM playback
modes.
DV
DVCAM
REC*
1
Recording format
This displays the format
used for recording.
1080i The tape is recorded using the 1080i format.
720p
The tape is recorded using the 720p format.
TM INFO*
2
Tape management
information
This displays the frame
rate (shooting speed)
information which is
recorded on a tape shot by
a variable frame rate
camera.
- - - A cassette tape has not been inserted.
24P
24PA
25P
These settings indicate the recorded frame rate.
INVALID The tape management information is invalid.
<Note>
In some cases, the tape management information may be erroneously overwritten by
insert editing or tape dubbing, and it may not be possible to play back properly.
REF Output reference
This displays the output
reference status.
HD23 The HD REF input signal has been selected as the reference. The frame frequency
is 23.98 Hz.
HD24 The HD REF input signal has been selected as the reference. The frame frequency
is 24 Hz.
HD25 The HD REF input signal has been selected as the reference. The frame frequency
is 25 Hz.
HD50 The HD REF input signal has been selected as the reference. The field frequency is
50 Hz.
HD59 The HD REF input signal has been selected as the reference. The field frequency is
59.94 Hz.
HD60 The HD REF input signal has been selected as the reference. The field frequency is
60 Hz.
IN50 The HD serial input signal has been selected as the reference. The field frequency is
50 Hz.
IN59 The HD serial input signal has been selected as the reference. The field frequency is
59.94 Hz.
IN60 The HD serial input signal has been selected as the reference. The field frequency is
60 Hz.
INT23 The signal (23.98 Hz) from the internal generator has been selected as the
reference.
INT24 The signal (24 Hz) from the internal generator has been selected as the reference.
INT25 The signal (25 Hz) from the internal generator has been selected as the reference.
INT50 The signal (50 Hz) from the internal generator has been selected as the reference.
INT59 The signal (59.94 Hz) from the internal generator has been selected as the
reference.
INT60 The signal (60 Hz) from the internal generator has been selected as the reference.
NTSC59 The SD REF input signal has been selected as the reference. The field frequency is
59.94 Hz.
PAL50 The SD REF input signal has been selected as the reference. The field frequency is
50 Hz.
INT59N The SD REF signal has been selected by the OUT REF setting. Since the SD REF
signal is not input, the signal (59.94 Hz) from the internal generator is selected as the
reference.
INT50P The SD REF input signal has been selected by the OUT REF setting. Since the SD
REF signal is not input, the signal (50 Hz) from the internal generator is selected as
the reference.