Filter
Top Products
30
Automatic Editing (deck-to-deck)
“Editing” refers to the work involved in using pre-recorded
tapes to bring different contents together or delete
unnecessary parts and bring together only the necessary
parts.
The basic editing steps are as follows.
1 Using the REMOTE button, set the player to REMOTE
and the recorder to LOCAL (ensure that the REMOTE
LED is not lighted).
2 Select the editing mode (ASSEM or INSERT).
3 Register the edit points of the recorder and player.
4 Check and modify, if necessary, the edit points.
5 Preview the material before editing it.
6 Proceed with the editing (AUTO EDIT).
7 Review the edited results.
Switch settings and adjustments
When using this VTR as the recorder
When using this VTR as the player
Set the VTR to the LOCAL status
(which is indicated when the REMOTE
LED is OFF).
Set the POWER
switch to ON.
Switch the time counter display to TC
or CTL.
Adjust the recording
levels.
Press the 9P button for 2 or more
seconds to set the VTR to the REMOTE
status which is indicated when the
REMOTE LED is ON.
Set the POWER
switch to ON.
Switch the time counter display to TC
or CTL.
A
djust the playback
levels.