Filter
Top Products
58
Function menus (continued)
<DIAG> (continued)
The underlining (__) denotes the factory setting mode.
Concerning the setup menu item No.015 (AUTO
STEP) setting (factory setting: OFF)
Up to 99 warning messages can be saved by the error log
function, and this setup menu item determines what kind of
save processing is to be conducted when this storage
capacity is exceeded.
OFF: 99 messages are set as the upper limit, and no
further messages of warnings that occur will be
saved.
ON: 99 messages are saved, and any further message of
a warnings that occurs is saved in No.99. The
warning messages already saved are each shifted
down by one number in succession.
Messages saved when ON is selected as the
setting
When up to 99 messages have been saved and the 100th warning
has occurred
Function button/
item
Switching
method
Setting
Corresponding setup menu
item
Description of setting
F1
WARN
___
___
___ For displaying the warning messages on the
LCD monitor.
F2
HOURS
___
___
___ For displaying the hour-meter on the LCD
monitor.
F3
UMID
___
___
___ The UMID information is displayed on the LCD
monitor.
F4
DIF1
___
___
___ The DIF status 1 is displayed on the LCD
monitor.
F5
DIF2
___
___
___ The DIF status 2 is displayed on the LCD
monitor.
F6
___
___
___
___ ___
F1 (SHIFT)
STEP
Toggle
OFF
ON
No. 015
AUTO STEP
Refer to the setup menu.
F2 (SHIFT)
CARD
FiPress
___
___ For calling the error log file operation menu.
F3 (SHIFT)
___
___
___
___ ___
F4 (SHIFT)
___
___
___
___ ___
F5 (SHIFT)
AL CLR
FiPress
___
___ For clearing error log files.
F6 (SHIFT)
___
___
___
___ ___
No. in
which
message
is saved
Saved warning
No. in
which
message
is saved
Saved warning
1/99 Warning 1 1/99 Warning 2
2/99 Warning 2 2/99 Warning 3
:
:
:
:
:
:
:
:
99/99 Warning 99 99/99 Warning 100