Filter
Top Products
64
Function menus (continued)
<FILE>
The current setting information, including the SETUP menu
contents, can be provided with titles and either saved in or
loaded from the backup memory in one of 4 variations.
When (FILE) is pressed while the button is held
down on the <MENU> screen, the following function menu is
displayed.
z This VTR comes with VTR MEMORY for storing the
current settings (*) and VTR MEMORY to for
storing these settings as a backup.
z Each VTR MEMORY can be provided with a title.
z Data can be saved and loaded and titles can be copied
between VTR MEMORY and VTR MEMORY to
.
z The file locking facility for preventing data from being
overwritten can be engaged for VTR MEMORY to .
* The term “settings” used here refers to all the settings
on the setup menus excluding the SYSTEM menu, what
has been registered in the PF1 and PF2 menu items,
and the contents of some of the function buttons.
Settings
1 Selecting the memory target
Press the button.
The operation target switches alternately between VTR
MEMORY and VTR MEMORY to .
2 Selecting the operation file in the selected memory
The number of the currently selected file is highlighted
on the display. When the ADJ dial is turned, the
highlighting moves to the left or right, enabling operation
files to be selected.
3 Transferring files between memories
After selecting the operation file, press (LOAD).
The contents of files selected in VTR MEMORY to
can be transferred to VTR MEMORY .
When is selected and (LOAD) is pressed, the
factory setting mode is established.
Alternatively, when (SAVE) is pressed, the contents
of a file in VTR MEMORY can be transferred to a file
selected in VTR MEMORY to .
(The titles are also transferred at the same time.)
4 Editing the title of the selected file
Press the ADJ dial after selecting the operation file.
The first digit of the title display area is highlighted, and
the file title can be edited.
z
To input a number, press the number keys.
z To input letters, tap the numbers keys until the letter
to be input appears while holding down the
button.
z More than one letter is allocated to each number key.
z Turn the ADJ dial to move from one digit to the next in
the title display area.
z To enter the title, press the ADJ dial again.
<Notes>
z When the display screen has been switched or the
button has been pressed during title editing, the
editing enable status is canceled, and the setting
becomes invalid.
z A space can be input by pressing the button and
button.
Name of memory
area
Initial title (up to 8
characters)
VTR MEMORY C CURRENT
VTR MEMORY 1 USER1
VTR MEMORY 2 USER2
VTR MEMORY 3 USER3
VTR MEMORY 4 USER4
F1
F
F1
SHIFT
F2 F3 F4 F5 F6
Memory selection cursor
Memory name
File status (VTR)
File title (VTR)
File number
(VTR)
File number
(VTR)
File title (VTR)
C
1 4
C 1
4
1 4
SHIFT
C 1 4
F2
1
4 C
F F2
F3
C
1 4
F
C
F
3