Filter
Top Products
28
Jog/Shuttle
Jog Mode
1 Push in the search dial.
Confirm that the JOG lamp lights.
2 Turn the search dial.
The dial’s click-stops are released, and the tape is played
back at the speed corresponding to the speed at which
the dial is turned.
The maximum jog speed can be changed by selecting
the setup menu item No.310 (JOG FWD MAX) and
No.311 (JOG REV MAX) settings.
When the dial is no longer turned, a still picture will
appear.
3 To transfer the VTR from the jog mode to another mode,
press the button that corresponds to the mode con-
cerned.
<Note>
The default setting for the search dial is the direct search
mode for moving to the shuttle mode/jog mode/variable
mode.
It is possible to set the mode to the search mode only when
the search button is pressed by changing the setting in
SETUP MENU No. 100 (SEARCH ENA) to [KEY].
Shuttle Mode
1 Press the search dial to return the pressed dial to the
original position.
The SHTL lamp lights, and the mode becomes the
shuttle mode.
z Immediately after turning on the power, turn the search
dial to the center position.
2 Press the SHTL/SLOW button to shift to [SHTL] or
[SLOW].
3 Turn the search dial.
z When the lamp lights for [SHTL] of JOG/SHTL/SLOW,
the playback rate will vary within the range from 0 to +/
-32 times. The range can be changed to +/-9.8, +/-16,
and +/-32 times in SETUP MENU No. 101 (SHTL
MAX). When the dial is at the center position, images
become still pictures.
z When the lamp lights for [SLOW] of JOG/SHTL/SLOW,
the playback rate will vary within the range from -4.9 to
+4.9 times. The maximum rate can be switched in
SETUP MENU No. 308 (VAR FWD MAX) and No. 309
(VAR REV MAX). However, noise may be generated
unless the rate is set within the range from -1.0 to +2.0
times. For recording tapes other than the DVCPRO
HD-LP recording tape, noise may be generated unless
the rate is set within the range from -1.0 to +1.1 times.
When the dial is at the center position, images become
still pictures.
4 To move from the Shuttle mode to other modes, press
the STOP button or other buttons.
<Notes>
z From the audio monitor output, audio can be played back
when the rate is within the range from -32 to +32 times.
However, you must select [PCM] in SETUP MENU No.
746 (MONI CH SEL).
z Audio playback in search mode may contain some noise.