Filter
Top Products
78
Function menus (continued)
<50P IN/OUT ASSIGN> (continued)
Flow of registration
50P IN/OUT ASSIGN function buttons
Open the
screen.
Status in which
registered 50-pin
connector pin
selection is enabled
Close the
screen.
F6 (EXIT)
Status in which selected
50-pin connector pin
menu item selection is
enabled
Press the ADJ dial.
Status in which
selected menu item
setting selection is
enabled
Turn the ADJ dial.
Turn the ADJ dial.
F4 (one pin reset)
F i F4 (all pins reset)
F5 (settings entered)
Turn the ADJ dial.
F1 (forward page scroll)
F2 (reverse page scroll)
Press the ADJ dial.
F3 (cancel)
Press the ADJ dial.
F3 (cancel)
Function button/
item
Switching
method
Setting
Corresponding setup
menu item
Description of setting
F1
:PREV
Press
___
___ For scrolling the on-screen menu pages in the forward direction.
F2
;NEXT
Press
___
___ For scrolling the on-screen menu pages in the reverse direction.
F3
CANCEL
Press
___
___ For releasing the menu item selection status.
F4
RESET
Press
___
___ For resetting one pin: what has been selected for the pin selected
by the individual reset selection marker is cleared.
FiPress
___
___ For resetting all the pins: what has been registered in all the pins
is set to the factory settings and set in the 50-pin registration file.
F5
SET
Press
___
___ For registering the file; all the function button settings are saved in
the 50-pin registration file.
F6
EXIT
Press
___
___ For exiting the special menu (and transferring to the original
menu).
F1 (SHIFT)
F2 (SHIFT)
F3 (SHIFT)
F4 (SHIFT)
F5 (SHIFT)
F6 (SHIFT)
___
___
___
___ ___