Panasonic AJ-HD1800P DVR User Manual


 
66
Function menus (continued)
<PF1/PF2>
Up to 24 frequently used setup menu items can be
registered. The items are registered on the function
menus shown below. (No settings have been registered
before the VTR leaves the factory.)
To display one of the function menus, press (PF1 FT),
(PF1 BK), (PF2 FT) or (PF2 BK) while holding
down the button on the <MENU SHIFT> screen.
Registration
1 Selecting the function buttons
Turn the ADJ dial to move the selection marker, and
select one of the function buttons to into which
the menu items are to be registered.
2 Entering the function button
Press the ADJ dial.
The display of the function button entered is highlighted.
3 Selecting menu items
Turn the ADJ dial, and select the menu item for the
function button which was selected in step
1 above.
4 Entering the menu items.
Press the ADJ dial.
The target of the ADJ dial operation returns to the front
panel. Whatever was selected in step
3 above is
displayed for the registered menu number and name.
5 To select a menu item for another function button,
repeat steps
1 to 4 above.
6 Saving the settings in a PF registration file
To save what has been set in the function buttons in a PF
registration file, press (SET).
If (EXIT) is pressed without the settings having been
saved, the settings will be canceled.
Clearing the menu items
1 Turn the ADJ dial to move the selection marker, and
select one of the function buttons to whose menu
items are to be cleared.
2 Press (RESET). The registered menu number and
name displays will now go blank.
To clear the menu items from other function buttons,
repeat steps 1 and 2 above.
3 To save what has been set in the function buttons in a
PF registration file, press (SET).
4 If (EXIT) is pressed without the settings having
been saved, the above settings will be canceled.
Clearing all the function button settings
Press (RESET) while holding down the button. All
the registered menu number and name displays will now go
blank.
All the contents of the PF registration file are cleared. (They
cannot be restored.)
F1
F2 F3 F4
F
F1
SHIFT
F2 F3 F4 F5 F6
Selection marker
Menu name
Registered menu number
Item selection cursor
Category
Item number
Setting
number
Item number
Item name
Setting
F1 F6
When menu items are registered, they can be called
simply by pressing the PF1 or PF2 direct menu button.
When is pressed :
<PF1 FT>
When is pressed after pressing :
<PF1 BK>
When is pressed :
<PF2 FT>
When is pressed after pressing :
<PF2 BK>
F5
F6
PF1
PF1 SHIFT
PF2
PF2 SHIFT
F1 F6
F4
F5
F6
F4
F