Filter
Top Products
32
RECORD OR MULTISCREEN 2 OUTPUT SETUP
The procedure described below let you determine the
mode for the REC OUT connector on the rear of the video
multiplexer.
As described before, this output can be used for recording
images on the time lapse VCR or monitoring images as
multiscreen 2 monitor.
1. Move the cursor to the REC/MULTI2 parameter in the
SETUP MENU by pressing the C or D button.
2. Select either REC OUTPUT or MULTI2 OUTPUT by
pressing the A or B button.
REC OUTPUT: Enables recording images on the time
lapse VCR.
MULTI2 OUTPUT: Enables monitoring images on the
connected multiscreen 2 monitor.
The factory default setting is REC OUTPUT.
3. Press the [HOME/SET] button to execute the selection
and then the selected submenu will appear on the mon-
itor screen.
■ Record Output Setup
Select REC OUTPUT in the menu and then press the
[HOME/SET] button.
The REC OUTPUT SETUP menu as shown in the figure
appears on the monitor screen.
These items let you determine the mode for recording on
the time lapse VCR.
● Camera Title Display
This item lets you enable or disable recording of the cam-
era title on the VCR.
1. Move the cursor to the TITLE DISPLAY parameter.
2. Select either ON or OFF.
ON: Enables recording of the camera title on the VCR.
OFF: Disables recording of the camera title on the VCR.
The factory default setting is ON.
● Clock Display
This item lets you enable or disable recording of the clock
display on the VCR.
1. Move the cursor to the CLOCK DISPLAY parameter.
2. Select either ON or OFF.
ON: Enables recording of clock display on the VCR.
OFF: Disables recording of clock display on the VCR.
The factory default setting is ON.
WJ-FS616C SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 REC OUTPUT *
SYSTEM SETUP *
CAM DOWNLOAD NO
CAM UPLOAD NO
ALL RESET SELECT *
REC OUTPUT SETUP
TITLE DISPLAY ON
CLOCK DISPLAY ON
DYNAMIC REC SETUP *
REC MODE SETUP *