Panasonic WJ-FS616C Home Theater Server User Manual


 
68
!6 Function button (FUNCTION)
This button is used to display the camera images with a
VCR playback image on the multiscreen monitor.
While displaying the setup menu on the monitor, press-
ing this button will select the next page of the setup
menu.
!7 Auto/Increment button (AUTO/+ )
This button is used to activate the auto panning function
if the camera is equipped with the specific future.
While displaying the setup menu on the monitor, press-
ing this button will select the parameter forwardly in the
setup menu.
!8 Home/Decrement button (HOME/–)
This button is used to return to the home position of the
camera.
While displaying the setup menu on the monitor, press-
ing this button will select the parameter reversely in the
setup menu.
!9 Alternate button (ALT)
Press this button to have the other 8 buttons switch to
their alternate functions. These buttons are identified
by special labeling - - text or a symbol in a rounded
corner rectangular. For example, while the indicator
(green) of the ALT button is lit, pressing the STILL but-
ton controls the VCR fast forward function.
@0 Multiscreen Selection button (MULTISCREEN
SELECT)
This button is used to select the multiscreen pattern to
be displayed on the multiscreen monitor while monitor-
ing the camera images or VCR playback images.
Pressing this button will toggle the screen pattern as
follows:
Camera Images:
4791013164 screen segments
VCR Playback Images:
49164 screen segments
@1 Electronic Zoom button (EL-ZOOM)
This button is used to zoom the image currently dis-
played on the multiscreen monitor.
Note: The above operation is not valid unless multi-
screen output is selected by pressing the [F1] but-
ton.
@2 Alarm Reset button (RESET)
This button is used to cancel an activated alarm.
Press this button, while the alarm function is activated,
to reset the alarm and return the system to the condition
before the alarm function was activated.
When more than one multiplexer are connected in a
daisy chain, pressing the ALT button and then this but-
ton resets all alarm inputs at once.
@3 Data ports (DATA, IN/OUT)
Exchanges control data with the video multiplexer in a
system.
@4 Termination switch (TERM., ON/OFF)
This switch enables termination of the controller’s data
port.
When combined with the video multiplexer, set this
switch to the “ON” position.
@5 Controller Unit Number switch
(CONTROLLER UNIT NO. 1-8)
This switch is used to identify the unit number of the
System Controller.
When combined with the video Multiplexer, set this
switch to the “0” position.
@6 Mode Selection switch (MODE)
These switches are used to set the mode of the system
controller connected to the video multiplexer.
When combined with the WJ-FS616C video multiplexer,
set as shown below.
@7 Controller On/Off switch (CONTROLLER ON/OFF)
This switch is used to turn the system controller power
on or off.
@8 Power Cord
MODE
OFF
ON