Filter
Top Products
34
■ Multiscreen 2 Output Setup
These items let you select the display mode when connect-
ing the Record Output (REC OUT) to the monitor for multi-
screen 2 monitor.
1. Move the cursor to the REC/MULTI2 parameter in the
SETUP MENU.
2. Select MULTI2 OUTPUT and then press the
[HOME/SET] button.
The MULTI2 OUTPUT SETUP menu as shown in the fig-
ure appears on the monitor screen.
3. Select the desired switching timing indicated as the
field interval (4 to 999) by pressing the A or B button.
Notes:
• Numbers can also be input directly with the Camera
Number buttons (1 - 10).
• Refer to the operating instructions of the VCR for
switching timing.
When MODE9 is selected in this table, select EXT1
or EXT4 by pressing the A or B button.
EXT1: Enables spot image recording on the VCR.
EXT4: Enables quad images recording on the VCR.
4. Press the [HOME/SET] button to move the cursor to the
right in the recording mode title column.
The square cursor appears in the character table.
5. To select a character, move the cursor on the desired
character in the table by pressing the C, D, A, or B
buttons.
6. Press the [HOME/SET] button to pick up the character
and place it in the title column.
7. Repeat steps 5 and 6 above to edit the title.
8. If a wrong character is selected, press the - or +
button to move the cursor in the title column.
Note: Press the + button to move the cursor to the right,
or press the - button to move the cursor to the left.
Then press the [HOME/SET] button to overwrite the
character with the character selected from the table.
9. Press the [SET UP/ESC] button. The cursor moves to
MODE number.
10. Repeat steps 1 to 9 above to assign the other MODE
numbers.
11. After completing the setting, press the [SET UP/ESC]
button to return to the REC OUTPUT SETUP menu.
12. After finishing the setting, press the [SET UP/ESC] but-
ton to return to the previous SETUP MENU.
WJ-FS616C SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 MULTI2 OUTPUT *
SYSTEM SETUP *
CAM DOWNLOAD NO
CAM UPLOAD NO
ALL RESET SELECT *
MULTI2 OUTPUT SETUP
DISPLAY POSITION *
SEQUENCE MODE SEQ2