Filter
Top Products
44
■ Password
This item lets you select whether to permit free or limited
access to the setup menus.
When PASSWORD is set to ON, the operator must enter the
password to access the setup menus.
1. Move the cursor to the PASSWORD parameter in the
SYSTEM SETUP menu.
2. Select either ON or OFF by pressing the A or B button.
ON: Enables limited access to the menus.
OFF: Enables freely access to the menus.
The factory default setting is OFF.
● Password Registration
Enter a 4-digit password consisting of numbers from 1 to 9
(except 0).
Password is required to access to the WJ-FS616C SETUP
MENU.
1. Select ON by pressing the A or B button.
The password editing area shown in the figure will
appear in the menu.
2. Press the [HOME/SET] button to move the cursor to the
first digit in the editing area.
3. Move the cursor to the position to be edited in the edit-
ing area by pressing the C or D button.
4. Select the desired number by pressing the A or B but-
ton.
Note: Numbers can also be input directory with the
[CAMERA (1 – 9)] buttons.
5. Repeat steps 3 and 4 until all digits are registered.
6. Press the [SET UP/ESC] button to execute the settings
and the cursor returns to ON position in the menu.
7. After finishing the settings, press the [SET UP/ESC] but-
ton to execute the settings and return to the previous
SETUP MENU.