Filter
Top Products
WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 219
Chapter 5: Settings
Network Adaptor Cards
5.33.3 Network Adaptor Cards
Important: For RA2041 (Summit) CF card adaptor setup details, refer to
“Setting Up A RA2041 Radio–Summit Client Utility” on page 17.
When the network card is inserted in your unit for the first time, the Network
Settings screen is displayed automatically so that you can configure the card. If it
does not appear, or if you want to change settings:
• Tap on Start>Settings>Connections.
• Tap on the Network Adapters icon.
• If you need to specify server information, double-tap on the appropriate
adaptor, and then tap on the IP Address and/or Name Servers tab.
Note: Because most networks use DHCP, you should not need to change these
settings unless instructed to do so by your network administrator.