Filter
Top Products
WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 11
Chapter 2: Basic Checkout
Preparing The WORKABOUT PRO For Operation
2.1 Preparing The WORKABOUT PRO For Operation
2.1.1 The Main Battery
Warning: Before charging the battery, it is critical that you review the battery
safety guidelines in the “WORKABOUT PRO Hand-Held Com-
puter Warranty & Regulatory Guide”, PN 8000126.
The WORKABOUT PRO C and WORKABOUT PRO S can be powered with one
of the following lithium-ion battery packs:
• High-Capacity – Model No. WA3006, and
• Super High-Capacity – Model No. WA3010
2.1.1.1 Charging The Main Battery
Important: Before opening the battery cover on your WORKABOUT PRO,
press [FN/BLUE] [ENTER] to turn off the hand-held
. When the
battery cover is removed, a power-off switch is automatically acti-
vated and the unit power is switched off; if the battery cover is
opened while the hand-held is still powered on, the unit may
reboot.
Important: Before replacing a battery, please read “Removing And Installing
The Battery Pack” on page 34 and “Safely Swapping The Main
Battery” on page 36 for details about safely swapping the battery.
Battery packs shipped from the factory are charged to approximately 40% and must
be fully charged prior to use. Batteries can be charged using a variety of chargers
and docking stations along with a WORKABOUT PRO internal charger. When
using the internal charger, a suitable power source is required. All chargers and
docking stations are described in Chapter 7: Peripheral Devices & Accessories
beginning on page 265.
Note: If you are powering up a new unit, a warning message may appear on the
screen indicating that the backup battery capacity is low. To recharge the
internal battery, you must fully charge the WORKABOUT PRO with
the
main
battery installed in the unit.