Filter
Top Products
SEARCHING FOR RECORDED VIDEO5
English 33
5 Turn the shuttle dial clockwise.
The display returns to the <MOTION DETECTION
SEARCH> screen.
6 Turn the jog dial to select “PREVIEW”.
7 Turn the shuttle dial clockwise.
Each time the shuttle dial is turned clockwise, a different
motion sensor screen will be displayed on the preview
screen.
If “NOT FOUND!” is displayed
Carry out motion sensor setting again.
8 Turn the jog dial to select “VIEW”, and
then turn the shuttle dial clockwise.
Normal playback will be started for the specified recording.
z By specifying a camera number (or channel) and
performing “MOTION DETECTION SEARCH”,
playback can be carried out for only the specified
camera number.
In such a case, the title information, date information,
and/or time information may partially disappear.
z To playback a recording from a different camera, stop
the current playback and then repeat the setting
process from the beginning.
Viewing video detected by the motion sensor
on a full screen
e00_l8hbe_xe_7.book Page 33 Tuesday, April 27, 2004 10:35 AM