Filter
Top Products
RECORD SET3
English 75
1 Turn the jog dial to select “MAIN MON.
DISPLAY”, and then turn the shuttle dial
clockwise.
“FULL” starts to flash for “MAIN MON. DISPLAY”.
[Settings] ( indicates the default setting)
2 Turn the jog dial to set “MAIN MON.
DISPLAY”, and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM PRIORITY”.
3 Turn the shuttle dial clockwise and turn
the jog dial to set “ALARM PRIORITY”,
and then turn the shuttle dial clockwise
once again.
The cursor moves to “MON.2 DISPLAY”.
[Settings] ( indicates the default setting)
z After an alarm duration has ended, the display returns
to the screen prior to alarm input.
4 Turn the shuttle dial clockwise and turn
the jog dial to set “MON.2 DISPLAY”
(ON/OFF), and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM RETRIGGER”.
[Settings] ( indicates the default setting)
5 Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
To forcibly cancel an alarm during alarm operation, press
the [CAMERA SELECT] button for the camera inputting
the alarm and hold it for approximately 3 seconds.
Alternatively, connect a switch between the alarm reset
terminal and C (the grounded terminal), and turn on the
switch to cancel any alarm that is occurring.
Setting alarm display
Setting Description
FULL
When an alarm is detected, the video on the
channel containing the alarm is displayed in full
screen format on the main monitor.
6
When an alarm is detected, a multi-6 screen
display is presented on the main monitor.
NC
The main monitor’s display does not change when
an alarm is detected.
Setting Description
LAST
When a number of alarms are occurring, the most-
recent alarm video is given priority.
FIRST
When a number of alarms are occurring, only the
video for the first alarm is displayed. However, if
the duration for the alarm with the first input
expires, video for the next alarm will be displayed.
SWITCH
When a number of alarms are occurring, the
display switches between the video from the
corresponding cameras, showing each for one
second.
Setting Description
ON
When an alarm occurs, the corresponding video is
displayed on the monitor 2.
OFF No alarm video is displayed on the monitor 2.
Canceling alarms
EXIT
C
ALARM
RESET
e00_l8hbe_xe_7.book Page 75 Tuesday, April 27, 2004 10:35 AM