Filter
Top Products
English 53
3 RECORD SET
The <RECORD SET> is used to make the following
settings.
Use the following procedures to make simple recording
settings. Two different setting methods may be used -- one
based on recording days; the other based on recording
rate.
z Before making easy setup settings, connect the
camera(s) to the digital video recorder and then always
perform “CAMERA DETECT”.
(JP.46)
z When easy setup settings and individual settings are
both set, the most recent settings override previous
settings.
z Easy setup settings will be cancelled as a result of the
following operations.
[EXIT] button
Jog dial
Shuttle dial
FULL indicator
ALARM FULL indicator
[MENU] button
Main Menu
Settings for recording
Setting Description Ref.
1
<EASY SETUP>
Makes basic settings based
on a number of days or a rate.
P.53
2
<RECORDING AREA SET>
Displays the total capacity of
the hard disk.
Sets the normal recording
area, the alarm recording
area, and the archive area.
P.57
3
<RECORDING CONDITIONS
SET>
Sets whether overwriting is to
be performed (by deleting old
video) or recording is to be
stopped when any of the hard
disk’s recording areas
become full. Also sets the
auto delete.
P.60
4
<NORMAL REC MODE
SET>
Sets the picture quality, audio
recording, the recording rate,
and the program period.
P.62
5
<PROGRAM REC SET>
Sets program recording for
cameras
P.63
6
<TIMER SET>
Makes timer settings so that
operations can be started at a
specified time or on a
specified day.
P.65
7
<ALARM REC MODE SET>
Sets alarm recording, pre-
alarm recording, and motion
sensors.
P.68
8
<ALARM OPERATION SET>
Makes settings for operation
and display upon detecting an
alarm.
P.74
Performing easy setup
e00_l8hbe_xe_7.book Page 53 Tuesday, April 27, 2004 10:35 AM