Filter
Top Products
RECORD SET3
English 55
7 Turn the shuttle dial clockwise.
“OFF” flashes.
8 To activate timer operation, turn the jog
dial to select “ON”, and then turn the
shuttle dial clockwise.
The cursor moves to “START”.
The following settings are carried out using the shuttle
dial and jog dial.
z Vertical cursor movement: Turn the jog dial.
z Cursor movement to the right: Turn the shuttle dial
clockwise.
z Modification of values: Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog
dial.
z Confirmation of values: Turn the shuttle dial clockwise.
If timer recording has been set to “ON”, the timer’s
“START” and “STOP” should now be set.
9 Set “PICTURE QUALITY”.
[Settings] ( indicates the default setting)
10 Set “AUDIO RECORDING”.
(Example: ON)
[Settings] ( indicates the default setting)
z Audio recording can only be specified when the
recording rate is 1.00 FPS or greater.
z When set to “ON”, the letter “A (indicating that audio will
be recorded)” is displayed in front of recording rate. As
both video and audio will be stored in the normal
recording area, this area’s overall capacity will reduce
accordingly.
11 Turn the shuttle dial counter-clockwise.
<WARNING> screen is displayed.
12 Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
The display returns to the <EASY SETUP> screen.
Setting Description
BASIC (BA) 15 kB
NORMAL (NO) 22 kB
ENHANCED(EN) 30 kB
FINE (FI) 42 kB
SUPER FINE (SF) 50 kB
Setting Description
OFF Audio recording is not carried out.
ON Audio recording is carried out.
e00_l8hbe_xe_7.book Page 55 Tuesday, April 27, 2004 10:35 AM