Filter
Top Products
NAMES AND FUNCTIONS OF PARTS2
8 English
INTRODUCTION
12. [EXIT] button and indicator
The [EXIT] button is used to exit the main menu or a sub-
menu. When a menu is displayed, the indicator will turn off;
when the menu is closed and the normal display is
restored, the indicator will light up.
13. [PLAY/STOP] button and indicator (JP.22)
When the [PLAY/STOP] button is pressed, a recording
from the normal recording area or alarm recording area is
played and the indicator lights up. When pressed during
playback, this button stops the digital video recorder.
14. [ZOOM] button and indicator (JP.23)
When the [ZOOM] button is pressed during playback on a
full screen, a portion of the playback video is magnified
and the indicator lights.
15. [SEARCH] button and indicator (JP.27)
When the [SEARCH] button is pressed while the digital
video recorder is recording or stopped, the search menu is
displayed and the indicator lights up. The search menu
can be closed by pressing this button once again.
16. [STILL] button and indicator (JP.24)
When the [STILL] button is pressed during playback, the
current frame is displayed as a still image and the indicator
lights up. Playback can be resumed by pressing this button
once again.
17. [SEQUENCE] button and indicator(JP.17)
The [SEQUENCE] button can be pressed during
monitoring to automatically switch between full screen or
quad screen display.
When pressed, the indicator begins flashing and the
display is changed automatically. The lighting condition of
CAMERA SELECT indicators also changes in response to
the screen display.
18. [COPY] button and indicator (JP.35)
The [COPY] button is used to copy recorded video to the
hard disk’s archive area, to a CompactFlash card, or to a
Microdrive.
The indicator lights up during the copy process.
19. [SHUTTLE HOLD] button and indicator (JP.22)
The [SHUTTLE HOLD] button is used to lock shuttle dial
operation for a constant speed of playback or slow playback.
The indicator lights up while the shuttle dial is locked.
When a password has been set, furthermore, this button
can be pressed for at least three seconds to activate the
security lock.
20. [REC/STOP] button and indicator (JP.19)
The [REC/STOP] button is pressed to start normal
recording, and the indicator lights up during this process.
Furthermore, pressing this button for at least three
seconds stops recording and turns off the indicator.
21. [TIMER] button and indicator (JP.19)
If the [TIMER] button is pressed while the recording is
stopped, timer recording standby mode is adopted and
recording will then start automatically at the set time. The
indicator will be lit up while in timer recording standby
mode.
If the button is pressed during timer recording, this process
is stopped and the indicator turns off. Furthermore, if the
[TIMER] button is pressed when in timer recording standby
mode, timer recording will be cancelled.
22. [ALARM] buttons (JP.27)
When an [ALARM] button is pressed during playback or
still, the digital video recorder skips to the next earlier or
next later alarm.
23. Jog dial (inside) and shuttle dial (outside)
z During playback:
Use the jog dial to change the playback speed.
Use the shuttle dial to perform fast-forward or fast-
reverse playback.
z During menu display:
Use the jog dial to move the cursor and to change
setting values. Use the shuttle dial to confirm settings.
24. CompactFlash card slot (JP.36)
This slot is used to house a CompactFlash card or
Microdrive.
25. [MENU RESET] button (JP.40)
The [MENU RESET] button is used to initialize menu
settings.
When setting motion sensors, furthermore, all sensors on
the same line as the cursor can be turned on
simultaneously by pressing this button.
123456
MENU EXIT
ZOOM
SEQUENCE
COPY
SHUTTLE HOLD
TIMER
ALARM
PLAY/STOP
SEARCH
STILL
REC/STOP
POWER FULL ALARM FULL LOCK ALARM
MULTI
OSDMON 2
QUAD
JOG
SHUTTLE
MENU
RESET
C
L
E
A
R
E
N
T
E
R
1 2 3 4 5
6
7 8
9 10
11 12 13
1514 16
23
17
20
21 22 19
18
24
25
e00_l8hbe_xe_7.book Page 8 Tuesday, April 27, 2004 10:35 AM