Filter
Top Products
GENERAL SET4
English 83
z Connecting to an intranet
(using a hub)
1 Press the [MENU] button and turn the
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
2 Turn the jog dial to select “5. NETWORK
SET”, and then turn the shuttle dial
clockwise.
The <NETWORK SET> screen is displayed.
3 Turn the shuttle dial clockwise.
”OFF” flashes for “NETWORK CONTROL”.
4 Turn the jog dial to set to “ON
(NETWORK)” or “ON (DVR)”, and then
turn the shuttle dial clockwise.
The cursor moves to “NETWORK STATUS”.
5 Turn the jog dial to select “ON” or
“OFF”, and then turn the shuttle dial
clockwise.
The cursor moves to “IP ADDRESS”.
[Settings] ( indicates the default setting)
Making network settings
2
1
3
4
Main Monitor
Monitor
(sold
separately)
PC
Ethernet switching hub
Ethernet switching hub
PC
A straight-type LAN cable
must be used here.
(10 BASE-T/100 BASE-
TX Category 5)
Intranet
MENU
Item Setting Description
NETWORK
CONTROL
OFF
The digital video recorder
cannot be controlled via a
network.
ON (NETWORK)
ID: 1, 2, 3
Connection
condition on
DVR: Connection
possible when
not performing
playback (incl.
during copy) or
menu display
Priority is given to operations
on the PC. When playback is
being performed on the PC,
live video is displayed on the
monitor connected to the
digital video recorder.
Furthermore, when connected
to a PC, only operations for
the switching of monitor
display will be possible using
the digital video recorder.
ON (DVR)
ID: 1
Connection
condition on
DVR: Connection
possible when
not performing
playback (incl.
during copy)
Priority is given to operations
on the digital video recorder.
Even if connected to a PC,
recorder operations are given
priority.
NETWORK
STATUS
ON
During network connection,
the message “NETWORK
CONTROL” is displayed on
the digital video recorder’s
monitor.
OFF
The message “NETWORK
CONTROL” is not displayed
on the digital video recorder’s
monitor, even during network
connection.
e00_l8hbe_xe_7.book Page 83 Tuesday, April 27, 2004 10:35 AM