Filter
Top Products
GENERAL SET4
English 85
3 Enter the password using the shuttle
dial and jog dial.
(1) Turn the jog dial to select “A” and then turn the shuttle
dial clockwise.
(2) The second entry item “1” flashes.Turn the jog dial to
select “B” and then turn the shuttle dial clockwise.
(3) The third entry item “1” flashes. Repeat the same
procedure to set “AB123456”.
4 Following this, turn the shuttle dial
clockwise.
5 Where necessary, use the same
procedure to set the “ID2” and “ID3”
passwords.
6 When setting has been completed,
press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
Use the following procedure to make RS-485 settings.
Connect the digital video recorder's RS-485 (A, B) control
terminals on the rear panel to the system controller or
similar device.
1 Press the [MENU] button and turn the
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen appears.
2 Turn the jog dial to select “4. RS-485
SET”, and then turn the shuttle dial
clockwise.
The <RS-485 SET> screen is displayed with the cursor
positioned on “DATA SPEED”.
3 Turn the shuttle dial clockwise and turn
the jog dial to set “DATA SPEED”, and
then turn the shuttle dial clockwise.
The cursor moves to “STATUS INFO”.
EXIT
Setting RS-485
MENU
e00_l8hbe_xe_7.book Page 85 Tuesday, April 27, 2004 10:35 AM