Filter
Top Products
INITIAL SET2
46 English
SETTINGS
7 Turn the jog dial to set a time, and then
turn the shuttle dial clockwise.
(Example: 05:00)
8 Press the [EXIT] button.
The setting procedure for the first digital video recorder is
ended and the display returns to the normal screen.
9 Use the same procedure to set the time
on the second recorder.
z Set the time to the same time of first digital video
recorder.
When you have finished making the settings, the display
returns to the normal screen.
The default setting value is “01:00”.
z Only an hour value can be set using “ADJUST. TIME”.
It is not possible to set a value for minutes and seconds.
Use the following procedure to automatically detect
cameras that have been connected. An “OFF” setting
should be made for cameras that have not been
connected.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “1. INITIAL
SET”, and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3 Turn the jog dial to select “2. CAMERA
DETECT”, and then turn the shuttle dial
clockwise.
4 Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
Connected cameras are automatically detected.
When detection has been completed, the display returns to
the <INITIAL SET> screen.
Detecting connected cameras
EXIT
MENU
<WARNING> screen is
displayed.
CAMERA DETECT !
e00_l8hbe_xe_7.book Page 46 Tuesday, April 27, 2004 10:35 AM