Filter
Top Products
GENERAL SET4
English 79
Use the procedures described below to set a passwords
and to prevent unauthorized users from operating the
digital video recorder. If a button is pressed while the
security lock is in operation, a buzzer will be sounded. Be
sure to make a note of the passwords that are set.
Operation after setting passwords
Two password types can be set, one for administrators
and one for users. The table below gives typical
password setting combinations and lists how the digital
video recorder operates for each.
Passwords comprise between 4 and 8 alphanumeric
characters.
Characters that can be entered in passwords: 0 to 9, A to Z
Example: Setting “123456AB” as a password
1 Press the [MENU] button and turn the
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
2 Turn the jog dial to select “3. SECURITY
LOCK SET”, and then turn the shuttle
dial clockwise.
The <SECURITY LOCK SET> screen is displayed.
The cursor moves to “ADMIN”.
3 Turn the shuttle dial clockwise.
The first password character “-” flashes.
4 Turn the jog dial to select a character (0
to 9, A to Z).
Example:
Turn the jog dial to select “1”.
5 Turn the shuttle dial clockwise.
The second password character “-” flashes.
6 Use the same procedure to set
“123456AB”.
Setting the security lock
Typical setting Operation
LEVEL PASSWORD (4 - 8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
All operations are locked.
Enter the user password
to enable playback
operations.
Enter the administrator
password to enable all
operations.
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : USER
All operations are locked.
Enter the user password
to enable playback and
recording operations.
Enter the administrator
password to enable all
operations.
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : ADMIN
Recording and menu
operations are locked.
Playback operations are
locked.
Enter the administrator
password to enable all
operations.
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : USER
Recording and menu
operations are locked.
Playback operations are
locked.
Enter the administrator
password to enable all
operations.
ADMIN -------- OFF
USER -------- ON
REC CONTROL : ADMIN
This setting cannot be
carried out.
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
All operations are
possible.
The security lock is not
activated.
(Default setting)
Setting the administrator password
MENU
ADMIN -------- OFF
ADMIN 1------- OFF
e00_l8hbe_xe_7.book Page 79 Tuesday, April 27, 2004 10:35 AM