Filter
Top Products
English 95
6 POWER FAILURE/USED TIME
Use the following procedure to check the date and time of
power failures, the amount of hard disk operation time, and
the amount of power-on time.
1 Press the [MENU] button and turn the
select “5. POWER FAILURE/USED
TIME”, and then turn the shuttle dial
clockwise.
The <POWER FAILURE/USED TIME> screen is
displayed.
Check the date and time of power failures and the amount
of hard disk operation time.
(1) FAILURE/RECOVER
Display information in sequence for the four most
recent power failures (i.e., the date and time of failure
and recovery).
The number on the left is the number of power
failures. (Example: #028). For all numbers above 999,
the number “999” is displayed.
(2) DISK1 USE
Displays the total amount of operation time for disk 1.
(3) DISK2 USE
Displays the total amount of operation time for disk 2.
When only one hard disk is installed, “------” is
displayed.
(4) POWER
Displays the amount of power-on time for the digital
video recorder.
2 Press the [EXIT] button.
The display returns to the normal screen.
Main Menu
[EXIT] button
Jog dial
[MENU] button
Shuttle dial
MENU
(3)
(1)
(2)
(4)
EXIT
e00_l8hbe_xe_7.book Page 95 Tuesday, April 27, 2004 10:35 AM