Filter
Top Products
RECORD SET3
62 English
SETTINGS
3 Turn the shuttle dial clockwise.
4 Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
Make a new “AREA FULL RESET” setting for “NORMAL
RECORDING AREA” and “ALARM RECORDING AREA”
on the <RECORDING AREA SET> screen.(JP.59)
Use the following procedure to make normal recording
settings for recording quality, audio recording, and
recording rate. Alternatively, a program number set using
“PROGRAM REC SET” can be specified to set these
parameters.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “2. RECORD
SET”, and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
3 Turn the jog dial to select “4. NORMAL
REC MODE SET”, and then turn the
shuttle dial clockwise.
The <NORMAL REC MODE SET> screen is displayed.
4 Turn the shuttle dial clockwise.
“ENHANCED” flashes (indicating enhanced quality
recording).
5 Turn the jog dial to select “PICTURE
QUALITY”, and then turn the shuttle dial
clockwise.
[Settings] ( indicates the default setting)
z The file size is intended as a general guideline and
actual sizes will depend on the recorded video.
The following settings are carried out using the shuttle
dial and jog dial.
z Vertical cursor movement: Turn the jog dial.
z Cursor movement to the right: Turn the shuttle dial
clockwise.
z
Modification of values : Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog dial.
z Confirmation of values : Turn the shuttle dial clockwise.
6 Set “AUDIO RECORDING”.
(Default setting: OFF)
(Example: ON)
When the normal recording area or the alarm
recording area become full
Setting normal recording
EXIT
MENU
Setting Description
BASIC (BA) 15 kB
NORMAL (NO) 22 kB
ENHANCED(EN) 30 kB
FINE (FI) 42 kB
SUPER FINE (SF) 50 kB
e00_l8hbe_xe_7.book Page 62 Tuesday, April 27, 2004 10:35 AM