Filter
Top Products
INITIAL SET2
English 47
Use the following procedure to set a unique title for each
camera so that these titles can be displayed on-screen.
Titles can be up to 10 characters in length per camera.
The following characters can be used.
z Letters: A to Z
z Numbers: 0 to 9
z Symbols: - : . / * _ (space)
Example: Setting the title “HALL-1F” for Camera No. 3.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “1. INITIAL
SET”, and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3 Turn the jog dial to select “3. TITLE
SET”, and then turn the shuttle dial
clockwise.
The normal monitoring screen is displayed with a title
setting field in the center.
4 Press the No. 3 [CAMERA SELECT]
button.
The video from Camera No. 3 is displayed on-screen.
5 Turn the shuttle dial clockwise.
The first position for title setting flashes.
6 Turn the jog dial to select “H”.
Characters change in the following sequence as the jog
dial is turned.
7 Turn the shuttle dial clockwise.
The character selection is confirmed and the cursor moves
one position to the right.
z When changing a character, move the cursor to that
character by turning the shuttle dial clockwise or
counter-clockwise, and then enter the required
character.
Setting camera titles
MENU
*
A09
-
:
.
/
Z
(space)
e00_l8hbe_xe_7.book Page 47 Tuesday, April 27, 2004 10:35 AM