Filter
Top Products
RECORD SET3
70 English
SETTINGS
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
“ALARM” appears in the operation display area.
When an alarm occurs, the number of alarms is displayed.
z If a new alarm occurs during alarm recording, the alarm
count is incremented in the same way as if two alarms
had occurred. However, in cases where alarms occur
consecutively on the same channel, alarm retrigger
settings (JP.74) can be used to ensure that these are
counted as one alarm only.
z
Settings cannot be made for “PRE-ALARM RECORDING”
when “ALARM RECORDING” is set to “OFF”
1 Turn the jog dial to select “PRE-ALARM
RECORDING”, and then turn the shuttle
dial clockwise.
“OFF” flashes.
2 Turn the jog dial to change “OFF” to
“ON”, and then turn the shuttle dial
clockwise.
A message appears indicating automatic rate adjustment.
“NO” flashes.
[Settings] ( indicates the default setting)
3 Turn the jog dial to select “YES” for
warning message, and then turn the
shuttle dial clockwise.
The cursor moves to recording rate and duration.
4 Turn the shuttle dial clockwise.
“REC RATE” for “PRE-ALARM RECORDING” flashes.
5 Turn the jog dial to set “REC RATE” (30
FPS, for example), and then turn the
shuttle dial clockwise.
(Default setting: 15.00 FPS)
“DURATION” for “PRE-ALARM RECORDING” flashes.
When alarm recording settings have been completed
To set pre-alarm recording
EXIT
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
02
Number of alarm
Alarm display
Setting Description
OFF Pre-alarm recording is not carried out.
ON Pre-alarm recording is carried out.
e00_l8hbe_xe_7.book Page 70 Tuesday, April 27, 2004 10:35 AM