2-6
Section 2 — Installation
Control Panel Cutout Dimensions
Using the dimensions shown in Figure 2-2, make cutouts in the console to
accommodate the control panel.
WARNING
Do not lift the control panel by the lid or the transition lever arms. Be careful
when opening or closing the panel lid. The gas shock supports may cause
the lid to open or close abruptly, causing possible injury or damage to the
equipment. Always lift the control panel by holding onto the tub.
Figure 2-2. Model 2200 Control Panel Console Cutout Dimensions
46"
(1168 mm)
21.8"
(554 mm)
22.16"
(563 mm)
42.4"
(1077 mm)
21.2"
(538 mm)
Pilot Holes
1.8"
(46 mm)
0.2"
(5 mm)
Rear
Front
Limits of
Cutout
Area