2-33
Switcher Option Module Installation
NOTE:
Be sure the mezzanine modules are oriented the same on each Mix/Wipe
Module.
2. From the solder side of the Mix/Wipe Module, attach the mezzanine to
the module, and install the screws into the metal spacers on the
mezzanine.
NOTE:
For best mechanical fit, Mezzanine modules should always be removed by
unscrewing from the solder side of the Carrier, not from the component side of the
Mezzanine.
Figure 2-16. Secondary Wipe and Look Ahead Preview Option Installation
SECONDARY WIPE MEZZANINE
PRIMARY WIPE MEZZANINE
LOOK-AHEAD
PREVIEW
MEZZANINE