Tektronix Digital Video Switcher TV Video Accessories User Manual


 
2-27
Switcher Option Module Installation
Digital Output Module Options
Two Serial Digital Output Modules are standard. Each of these has eight
different output signals (2 BNCs per output for a total of 16 BNCs on each
module). The third serial output module is the Timed Aux Output Module
which has eight outputs. Only six of these outputs are used.
Serial Output 1 (Slot C3)
Mask
Switched Preview
Look Ahead Preview
1
Look Ahead Preview
1
M/E 1 Program Video
M/E 1 Program Key
M/E 2 Program Video
M/E 2 Program Key
Serial Output 2 (Slot C11)
M/E 1 Clean Feed Video
M/E 2 Clean Feed Video
Aux/Effects Send Bus 1A (Video)
2
Aux/Effects Send Bus 1B (Key)
2
Aux/Effects Send Bus 2A (Video)
2
Aux/Effects Send Bus 2B (Key)
2
Framestore Video
Framestore Key
Timed Aux Output (Slot C17)
Aux Bus 3A (Video)
Aux Bus 3B (Key)
Aux Bus 4A (Video)
Aux Bus 4B (Key)
Aux Bus 5A (Video)
Aux Bus 5B (Key)
1. Preview video is available only of optional Lookahead Preview Module is installed.
2. Available only if the optional Effects Send is installed.