Filter
Top Products
Ethernet Configuration and Control, cont’d
MGP 462 • Ethernet Configuration and Control5-16
Window Mute
Select the Enable or Disable radio button in the Window Mute field to mute/
unmute the selected window. The corresponding Input button(s) on the front panel
blink continuously when the window is muted.
Executive Mode
Select the Enable radio button in the Executive Mode field to lock all front panel
controls except Input Selection, Freeze, and Window Preset. (The
RS-232/422 and Ethernet ports remain accessible.)
Freeze
Select the Enable radio button in the Freeze field to freeze the image in the selected
window. The front panel Freeze button(s) for the selected window(s) light when
Freeze is enabled.
Film Mode
Select the Enable radio button in the Film Mode field to have the MGP 462 detect
whether 3:2 or 2:2 pull-down is needed to deinterlace the input video. The input
you selected at the top of the screen must be set to YUVi, Composite, or S-video.
(See Using the Configuration Pages, Scaler Settings screen section for information on
selecting video signal types.)
User Control screen, bottom half
Picture Controls – Window
The Picture Controls section contains + and – buttons, which you can click to
increase or decrease parameter values for the selected window. If a text field is
provided, you can also enter the value in it.
You can make the following adjustments:
Horizontal Shift — Move the selected window to the right or left on the screen.
The value in the text box is the distance in pixels of the window’s left edge
from the left edge of the display. The range is determined by the output size;
the default is 2048 plus or minus the output rate.