Filter
Top Products
3-7MGP 462 • Operation
The following diagram shows the submenus of the Input Configuration menu and
the adjustments that can be made from them.
Input Configuration menu flow
The following table lists the signal types available for each input.
Input video signal types
Signal Type Input 1 Input 2 Input 3 Input 4 Input 5 Input 6
RGB*** X* X* X* X*
YUVp XXXX
RGBcvS_ XXXX
YUVi XXXX X
S-video XXXX XX
Composite XXXX X*X*
SDI X**
* Default
** MGP 462D only
*** RGBHV, RGBS, and RGsB are accepted with this input setting.
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Input
Configuration
Input #1
RGB
MENU
NEXT
NEXT
Input video type*
Select a signal format:
• RGB
• YUVp
• RGBcvS
• YUVi
• S-video
• Composite
• SDI (MGP 462D only)
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
* Video types available and default
settings vary with the input selected.
NEXT
Input #1
Film Mode ON
NEXT
Film Mode
Turn Film Mode on
or off (for low-
resolution devices).
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Input #1
Vert Start 0128
NEXT
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Vertical Start
Select a vertical
start line position
for the top edge of
the active video.
Input #1
Horz Start 0128
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Horizontal Start
Select a horizontal
start pixel position
for the left edge of
the active video.
Input #1
Pxl Phase#1 16
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Pixel Phase 1
Adjust the pixel
sampling point for
window 1 for each
input.
Input #1
Total Pxl 1688
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Total Pixels
Specify the width in
pixels of the total
image area to be
sampled.
NEXT
Input #1
Active Pxl 1280
NEXT
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Active Pixels
Specify the width
in pixels of the
active image area
to be sampled.
Input #1
Active Lns 1024
NEXT
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Active Lines
Specify the height
in lines of the
active image area
to be sampled.
NEXT
NEXT
Input #1
Pxl Phase#2 16
Input
• Input #1
• Input #2
• Input #3
• Input #4
• Input #5
• Input #6
Pixel Phase 2
Adjust the pixel
sampling point for
window 2 for each
input.
Auto
Image