Filter
Top Products
Software Configuration and Control, cont’d
MGP 462 • Software Configuration and Control4-24
Command/response table for IP control port commands (continued)
Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to processor) (host to processor) (processor to host)
Mail server setup commands
Set mail server IP, unit domain name
24
Esc
X14
,
X15
,
X81
,
X82
CM
W
X14
%2C
X15
%2C
X81
%2C
X82
CM
|
Ipm •
X14
,
X15
,
X81
,
X82
X81
= E-mail account user name.
Maximum length is 31 characters.
X82
= E-mail account password.
Maximum length is 31 characters.
These parameters are
optional.
Read mail server IP, unit domain name
Esc
CM
W CM
|
X14
,
X15
,
X81
,
X82
Web browser specific commands
Read response from last URL cmd
Esc
UB
WUB
|
Response from command
IP setup commands
Set unit name
24
Esc
X12
CN
W
X12
CN
|
Ipn •
X12
Change the processor’s name to
one of your choosing (
X12
). The
name consists of up to 24
alphanumeric characters (and the
minus sign). The first character
must be a letter, the last character
cannot be a minus sign (hyphen).
Case does not matter.
Set unit name to factory default
24
Esc
• CN
W%20CN
|
Ipn •
X49
X49
is the name the processor was
shipped with: MPG462-##-##-##, a
combination of the model name
and the last three pairs of the hex
numbers in the processor’s MAC
address (e.g., MGP462-00-02-3d).
Read unit name
Esc
CN
WCN
|
X12
X12
is the processor’s current unit
name.
X49
is its factory default
name.
Set time/date
24
Esc
X13
CT
W
X13
CT
|
Ipt •
X13
X13
is local date and time format.
The set format is MM/DD/YY-
HH:MM:SS.
Example: 11/18/03-10:54:00