Filter
Top Products
Software Configuration and Control, cont’d
MGP 462 • Software Configuration and Control4-30
Command/response table for IP control port commands (continued)
Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to processor) (host to processor) (processor to host)
Directory commands
Change/create directory
Esc
{path}/{directory}/CJ
W {path}/{directory}/CJ
|
Dir•{path}/{directory}/
A directory does not actually exist until a file has been copied into the path.
Move back to root directory
Esc
/ CJ W%2FCJ
|
Dir•/
Move up one directory
Esc
..CJ W%2E%2ECJ
|
Dir•{path}/{directory}/
View current directory
Esc
CJ WCJ
|
{path}/{directory}/
File erase commands
Erase user-supplied Web page/file
24, 28
Esc
{filename} EF W {filename} EF
|
Del • {filename}
Erase current directory and its files
24, 28
Esc
/EF W/EF
|
Ddl
Erase current directory and subdirectories
24, 28
Esc
//EF W//EF
|
Ddl
Reset (ZAP)/Erase commands
Erase flash memory
24
Esc
ZFFF WZFFF
|
Zpf
Reset all device settings to factory default
24
Esc
ZXXX WZXXX
|
Zpx No IP-related settings are reset.
Absolute system reset
Esc
ZQQQ WZQQQ
|
Zpq Reset all settings/memories. The
ZQQQ command resets all
settings, adjustments, the IP
address, and subnet mask to the
factory default values. The IP
address is reset to 192.168.254.254,
and the subnet mask is set to
255.255.0.0. (This command is
identical to Reset mode 5).
Absolute reset retaining IP address
Esc
ZY WZY
|
Zpy All settings are reset except the IP
address.