Filter
Top Products
4-25MGP 462 • Software Configuration and Control
Command/response table for IP control port commands (continued)
Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to processor) (host to processor) (processor to host)
IP setup commands, continued
Read time/date
Esc
CT WCT
|
X13
The Read format is day of week,
DD month year HH:MM:SS.
Example: Tue, 18 Nov 2003
18:19:33
Set GMT offset
24
Esc
X3
CZ W
X3
CZ
|
Ipz
X3
Set the Greenwich Mean Time
GMT) offset value (
X3
) for the
processor’s location. GMT offset
(-12.00 to +14.00) represents the
time difference in hours and
minutes (± hh:mm relative to
Greenwich, England. The plus
sign and leading zero are
optional. Example: 5:30 = +05:30
Read GMT offset CZ
WCZ
|
X3
Set daylight savings time
24
Esc
X34
CX W
X34
CX
|
Ipx
X34
X34
is the Daylight Savings time
of day. Daylight Savings Time
(DST) is a 1-hour offset that is
observed in the USA and parts of
Europe and Brazil.
For example, California uses
GMT -8:00 from April to October
and -7:00 GMT from November
to March. DST should be turned
off in Hawaii, American Samoa,
Guam, Puerto Rico, the U.S. Virgin
Islands, the eastern time zone part
of Indiana, and Arizona
(excluding the Navajo Nation).
0 = off/ignore
1 = on
Read daylight savings time
Esc
CX WCX
|
X34
Set DHCP on
24
Esc
1DH W1DH
|
Idh1
Set DHCP off
24
0DH W0DH
|
Idh0
View DHCP mode
Esc
DH WDH
|
Idh
X5
X5
= 0 (off) or 1 (on).
Set IP address
24
X14
CI W
X14
CI
|
Ipi •
X14
X14
= IP address (xxx.xxx.xxx.xxx).
Leading zeros in each of the four
fields are optional in setting
values.