Filter
Top Products
3-17MGP 462 • Operation
CAUTION
The image that you save overwrites any existing image file with the
same file name.
4. Press the Detail button (the top button located at the immediate left of the
LCD screen).
The LCD screen displays the message “Saving Background Please Wait,”
along with an incrementing number showing the percent of the file that has
been captured. The time the MGP takes to save an image varies depending
on the image file size. For example, a 102 by 768 pixel image takes about 90
seconds to save.
The unit does not respond to any commands while it is saving an image.
5. If you want to recall a background file for the output display, press Next
within 20 seconds. (After 20 seconds, the MGP 462 returns to the default
cycle.)
Recalling a background from memory
To recall an image from memory for use as a background:
1. Access the Recall Background from Memory submenu.
2. Rotate either Adjust knob to select one of background image files (bkg01.bmp
through bkg16.bmp) to use as the output background.
To perform no action, press the Menu button.
3. Press the Next button to recall the image. The LCD screen displays the
message “Recalling filename.bmp” while the image is being recalled, then
“Recalled filename.bmp” after the recall is complete.
Advanced Configuration menu
Use the Advanced Configuration menu to set the background color, turn Blue
Mode on and off, select test patterns, and select the serial communication mode.
You can also view the MGP’s internal temperature and reset the unit to its factory
defaults.
Advanced Configuration menu flow
Advanced
Configuration
NEXT
Background Color
None
Background
Capture
MENU
Test Pattern
Off
Test pattern type
• Off (default)
• ColorBars
• X-Hatch
• 4 x 4 X-Hatch
• Grey Scale
• Crop
• Ramp
• Alt. Pixels
• Side-By-Side*
• 1.78 Aspect*
• 1.85 Aspect*
• 2.35 Aspect*
Blue Mode
Off
* These test pattern types vary depending on the
output rate selected.
Rotate either Adjust knob
to adjust the submenus.
NEXT
NEXT
NEXT
Serial Port Mode
<RS232> RS422
NEXT
NEXT
Internal Temp.
120.20F 49C
Factory Default
[DETAIL]
NEXT
Serial Communications Mode
• RS232 (default)
• RS422
Unit Internal Temperature
Current internal temperature
expressed in degrees Fahrenheit
and Celsius. Not adjustable.
Factory Default
Press the DETAIL button
to reset the unit to its
factory default settings.
When finished, the system
returns to the default cycle.
DETAIL
Factory Reset
Please Wait !!!
Blue Mode
• Off (default)
• On
Background color
• None (default) • Magenta
• Red • Cyan
• Green • Yellow
• Blue • Stored-Image
• White • User Defined