Filter
Top Products
5-3MGP 462 • Ethernet Configuration and Control
5. If in step 4 you entered the filename for a custom HTML page, the
browser displays that page. If not, the browser displays the System
Status page, which is the MGP 462’s default start page. You can select the
tabs at the top of this screen to display additional screens that enable you
to configure and control the MGP 462.
Viewing System Status
The System Status Web page on the Status tab provides information on your
MGP 462’s current settings. Changes to these settings can be made via the
Configuration Web pages, SIS programming, the Windows-based control software,
or the MGP 462 front panel. Personnel who have user access can view this page but
cannot access the Configuration pages; they see only the Status tab. The following
figure shows a typical MGP 462 System Status web page.
System Status screen
On password-protected connections, there are two levels of protection:
administrator and user. Administrators have full access to all the MGP’s
functions. Users can only view all the settings except passwords.
• Ethernet connection to the MGP, either entering SIS commands or using the
Windows-based Control Program (see chapter 4, Software Configuration and
Control) is password protected.
• Connection via the RS-232/RS-422 port is not password protected.