Filter
Top Products
Software Configuration and Control, cont’d
MGP 462 • Software Configuration and Control4-20
Command/response table for IP control port commands (continued)
Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to processor) (host to processor) (processor to host)
Ethernet data port
Set current connection port timeout
Esc
0 *
X51
TC W 0 %2A
X51
TC
|
Pti 0 *
X51
X51
= number of seconds (in tens of
seconds) before timeout on IP
connections.
View current connection port timeout
Esc
0TC W 0TC
|
X51
Set global IP port timeout
Esc
1 *
X51
TC W 1%2A
X51
TC
|
Pti1 *
X51
View global IP port timeout
Esc
1TC W 1TC
|
X51
An asterisk (*) after the version number indicates which version is currently running. A caret (^) indicates bad checksum/invalid load. Question marks (?.??) indicate
version not loaded.
Firmware version requests
Query firmware version Q or 1Q Q or 1Q
X11
Show the processor’s firmware
version number (
X11
) to two
decimal places. Gives the number
of the currently running version
of the user-updatable firmware.
With tagged response – verbose modes 2 and 3:
Ver01*
X11
Query verbose version information 0Q 0Q Sum of responses from 2Q-3Q-4Q
Show bootstrap, factory-installed,
and updated firmware versions.
(See 2Q, 3Q, and 4Q, below.)
With tagged response – verbose modes 2 and 3:
Ver00 * Sum of responses from 2Q-3Q-4Q
Example: 1Q 1Q 1.01
Query bootstrap version 2Q 2Q
X11
The bootstrap firmware is not user-
replaceable, but you may need this
information for
troubleshooting.
With tagged response – verbose modes 2 and 3:
Ver02 *
X11
Example: 2Q 2Q 0.06