Filter
Top Products
Ethernet Configuration and Control, cont’d
MGP 462 • Ethernet Configuration and Control5-8
Parameters with separate menus for Window 1 and Window 2
Text Border Color — Select a color for the border surrounding the text label in the
window. The default is Black.
Text Color — Select a color for the text displayed in the window. The default is
Black.
Text Background Color — Select a color for the text label background. The default
is White.
• Off specifies that there is no special background for the text label; only the
window background (specified from the Advanced Configuration menu; see
the next section) is behind the text.
• Translucent specifies that the window background shows through the text
background with a cloudy effect.
Window Border Color — Select a color for the border around the entire window
display. The default is Off, which specifies that there is no window border.
Advanced Configuration
This section contains menus and radio buttons that allow you to select additional
system parameters.
Background Color — Select a color for the background of the output screen display
on both windows.
Test Patterns — Select a test pattern to be displayed on the output.
Blue Screen Mode — Turn Blue mode off or on. Blue mode causes only the sync
and blue video signals to be passed to the display, which aids in the setup of the
display color and tint.
Serial Port Mode — Select RS-232 or RS-422 control.
Background Capture
The pull-down menus let you save an image, or to recall an image that has been
saved and use it as the background for the two windows.
The MGP 462 supports 24-bit bitmap files only. Their file names must have
the format Bkgnn.bmp. See Background Capture menu in chapter 3 for
information on calculating the size of an image.
Save Background Image — From this menu, select a number to assign to the image
you want to save.
Recall Background Image — From this menu, select the number that was assigned
to the image that you want to use for the background behind the windows.