Filter
Top Products
3-9MGP 462 • Operation
Output Configuration menu
The Output Configuration menu allows you to set the output resolution, refresh
rate, output type, and sync polarity. The following flow diagram shows the
submenus of the Output Configuration menu, and the adjustments that can be
made from them.
The menus time out and return to the default cycle after 20 seconds of
inactivity. However, any selections you made with the Adjust knobs are saved
and remain in effect.
Output
Configuration
NEXT
Resol 1024 x 768
Refresh @60 Hz
Output Type
RGBHV
Sync Polarity*
H Neg V Neg
NEXT
NEXT NEXT
Input
Configuration
MENU
Resolution Refresh rate
See the following table for available
combinations of resolutions and
refresh rates.
Default: 1024 x 768 @60 Hz
Video signal types
• RGBHV / RGBS (default)
• RGsB
• YUV Bi-Lvl (Current NTSC
standard)
• YUV TriLvl (Current HDTV
standard)
Polarity combinations
• H Neg V Neg (default)
• H Neg V Pos
• H Pos V Neg
• H Pos V Pos
*Appears only when sync polarity is
applicable, based on other output settings.
Output configuration menu flow