Filter
Top Products
5 Virtual-IO Manager user interface
For a standard configuration, these values should not be
changed.
5.5.2 Authentication dialog box (PRIMERGY rack server)
The Authentication dialog box is displayed when you click the Manage or
Authentication button on the Setup tab. This dialog box varies depending on
what you have selected in the table on the Setup tab.
If you select one or more PRIMERGY rack server(s) in this table on the
Setup tab, the following Authentication dialog box is shown.
Figure 66: VIOM Manager authentication (PRIMERGY rack server)
For each PRIMERGY rack server, you must to specify the user name and
password for the iRMC with which VIOM can access this server. If more
than one PRIMERGY rack server is selected in the table, there is a check-
box called Use for all components which, when checked, sets the values
for all PRIMERGY rack servers to the ones specified for the first PRIM-
ERGY rack server. So, if the user name and password are the same for all
PRIMERGY rack servers, you only need to specify them once.
For security reasons you should change the default user name and password
combination. You can have the same user name and password for all com-
234 ServerView Virtual-IO Manager