Filter
Top Products
FunctionConfiguration
optional
Specifies the configuration for a function (see " The Func-
tionConfiguration element" on page 329). This element must be specified
for functions and must not be specified for other IOChannelType.
12.3.5 The Address element
An Address element that specifies the E-MAC address of a CNA FCoE-func-
tion must have the attribute purpose="fcoe". Each other Address element
must have the attribute purpose="normal".
If it does not contain any elements, the VIOM Manager automatically assigns
the virtual addresses according to the port type during the import.
A LAN port, CNA LAN-function, or CNA iSCSI-function may contain the
VirtualMAC element whose value is the virtual MAC address.
An FC port may contain the VirtualWWNN and/or VirtualWWPN elements
whose values are the corresponding virtual addresses. If only one of these
two elements is specified, the VIOM Manager automatically assigns the
other virtual address during the import.
A CNA FCoE-function may contain the VirtualMAC element additional to
the elements of a FC port. If it is not specified, the VIOM Manager assigns
the E-MAC address during import.
The ignoreRange attribute of the VirtualMAC, VirtualWWNN, and
VirtualWWPN elements specifies whether the given virtual address is in the
range that was specified when you installed VIOM. Possible values for this
attribute are Yes (ignore the range) and No (check the range).
12.3.6 The BootEnvironment element
The BootEnvironment element contains the BootPriority element and one
of the following elements:
l PXEBootConfiguration
l ISCSIBootConfiguration
ServerView Virtual-IO Manager 323
12.3 Format of export files