Filter
Top Products
Operation
Document 900.0856 Rev 3.00 113
11/07
f. Highlight the box beside Video Loss and press . You can select the
cameras for which you want to search for any reports of lost video.
g. Highlight the box beside Text-In and press . You can select the text-in
devices for which you want to search for any report of text input.
h. Highlight the box beside Record Channels and press . You can select the
cameras that you want to search for any reports of event recorded data. The
DVR will display the events (not the camera channels) that occurred and that
also are recorded on the camera channel that you selected. If you do not
select a camera channel in this field, the DVR will search events that are not
associated with cameras.
i. You can also toggle On and Off self-diagnostic events as part of your search.
The choices are:
•Panic Record
•Check Recording
• Check Alarm-In
•Disk Almost Full
• Disk Bad
•Disk Temperature
•Disk S.M.A.R.T.
5. Once you set your desired search conditions, highlight Search and press to
display the search results in the Event Log Search screen. Selecting Cancel exits
the screen without saving the changes.
Text-In Search
Figure 4-16 Text-In Search Screen
The DVR maintains a log of each time there is Text Input. The Text-In Search screen
displays this list.
1. Use the arrow buttons to highlight the event for which you would like to see video.
2. Pressing will extract the video associated with the Text Input and display the
first image of the event.