Filter
Top Products
Configuration
74
When the DVR is in the Event Record mode it is possible to have it record images
before the event occurs. The Pre-Event screen allows you to define how to handle
pre-event recording.
2. You can turn individual cameras On or Off for pre-event recording. The image
speed can be set from 0.10 to 30.00 ips (25.00 ips PAL), and image quality can be
selectable from Very High, High, Standard and Low.
3. You can set the amount of time to record prior to the event by adjusting the Dwell.
You can set the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the
fewer maximum ips can be set.
Note When the DVR is in the Time or Time & Event mode, it ignores
the pre-event settings and follows the time settings.
4. You can save your changes by highlighting Save and pressing . Selecting
Cancel exits the screen without saving the changes.
Archive Screen
1. Highlight Archive in the Record menu and press , and the Archive setup
screen (Figure 3-53) appears.
Figure 3-53 Archive Setup Screen
2. Highlight Archive On and press to toggle between On and Off.
Note If you have not set up a storage device for archiving, a message
appears notifying you of this.
3. Select the Days and Time Range you want archived.