Filter
Top Products
Configuration
86
Figure 3-71 Text-In Device (VP Filter) Settings Screen
Figure 3-72 Text-In Device (Generic Text and EPSON-POS) Settings
Screen
3. Highlight the box beside Port, and press . Select from None, RS232, RS485
and USB-Serial (1~8).
Note If you have set the Port as None, you will not be able to make
any changes to the screen.
Note When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
4. Highlight Setup…, and press . Use the ATM or POS manufacturer’s
recommended settings when configuring the RS232, RS485 or USB-Serial ports.
5. Highlight the box beside Text-In Product, and press . Select your device from
the list.