Filter
Top Products
Time Overlap
Document 900.0856 Rev 3.00 139
11/07
E
Time Overlap
If the DVR’s time and date have been reset to a time that is earlier than the existing
recorded video, it is possible for the DVR to have more than one video stream in the
same time range. In this case, you can search overlapping video streams individually
by selecting a specific segment. For example, when the DVR has recorded video from
one to five o’clock and the user changes the time backward from five to three o’clock
and then continues recording until six o’clock, there will be two video streams and
segments from three to five o’clock.
You can search overlapping video streams by selecting a specific time or time range. If
you want to search recorded video at four o’clock during the overlapping time range
using a search menu such as Go to the Date/Time, select the segment you want to
search.
If you want to search recorded video from four to five o’clock during the overlapping
time range using a search menu such as Event Log Search, Text-In Search or Motion
Search, it is possible for the DVR to have two overlapping start and stop times. You will
be asked to select one of the overlapping start and stop times from the search time
ranges as follows:
• From four o’clock of the first segment to five o’clock of the first segment
• From four o’clock of the first segment to five o’clock of the second segment
• From four o’clock of the second segment to five o’clock of the second segment