Filter
Top Products
Configuration
Document 900.0856 Rev 3.00 89
11/07
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-74 Text-In Actions 2 Screen
19. Highlight the desired box under the PTZ heading, and press . A list of PTZ
presets appears. Select the preset positions for each PTZ camera, this is where
you want PTZ cameras to move to when the DVR detects text input.
20. Highlight the box under the Spot Monitor and press . A list of SPOT monitors
and cameras appears. Each SPOT monitor can be associated with a camera. The
DVR will display the associated camera on the SPOT monitor whenever it detects
an input on the selected text-in device.
21. You can save your Text-In changes by highlighting Save and pressing .
Selecting Cancel exits the screen without saving the changes.
System Event Screen
1. Highlight System Event in the Event menu and press . The System Event
setup screen (Figure 3-75) appears.