C H A P T E R 6 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide
6-6
Disabling Telnet
Telnet sessions are disabled at the 7110/7115’s local serial console.
To disable, follow the steps below:
Intel 7115> set telnet disable
To verify Telnet disable:
Intel 7115> show telnet
Telnet: disable
To ensure that Telnet sessions remain disabled across a device
shutdown and startup, run the config save command.
Remote SSh Sessions
This section contains procedures for accessing the 7110/7115’s CLI
via remote Secure Shell (SSh) session.
Local Serial Console
Assign an IP address to the 7110/7115’s network interface using the
following procedure:
Intel 7115> set ip
Enter IP [10.1.2.56]: 10.1.1.1
Enter Netmask [255.255.255.0]:
Verify the IP and netmask (optional):
Intel 7115> show ip
System IP Address: 10.1.1.1
System Netmask: 255.255.255.0.
Enable remote SSh sessions:
Intel 7115> set ssh enable
Configure the network route:
Intel 7115> set route
Enter Default Route (’none’ to delete)
[10.1.1.1] : <enter>