Filter
Top Products
C H A P T E R 7 Alarm Types
7-3
For example:
Intel 7115> set alarms
Select monitoring fields (all, esc, rsc,
utl, ovl, nls) [all]: all
Intel 7115> show alarms
All alarms are enabled.
Intel 7115> set alarms none
Intel 7115> show alarms
All alarms are disabled.
Alarm Types
The configurable alarm types are detailed in separate sections below.
ESC: Encryption Status Change
Alarm
When enabled, an alarm is issued when the device is changed
between INLINE and BYPASS modes. This change can be made
from CLI using the commands, inline or bypass, or at the device’s
front panel by pressing the BYPASS button.
Format:
A:yyyymmddhhmmss:ESC:HDWR|CONB|CONI|FNTB|
FNTI|APPR:/*message*/
Where:
A: identifies the message as an alarm.
yyyymmddhhmmss: is the timestamp.
ESC: identifies the message as an Encryption
Status Change Alarm.
Alarm Modifiers and Messages:
HDWR: indicates crypto card failure
CONB: indicates console-controlled bypass
CONI: indicates console-controlled inline