Filter
Top Products
C H A P T E R 2 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide
2-4
Status Check
Before proceeding to the PC Initialization section, take a moment to
verify that the 7110/7115 is correctly connected.
Network and Server LEDs
Verify that the Network and Server LEDs are both illuminated. If one
or both are not, refer to the Troubleshooting section at the end of this
chapter.
Inline LED
A blinking Inline LED indicates that the system is online in Fail-safe
mode. Refer the Troubleshooting section at the end of this chapter or
Appendix B, “Failure/Bypass Modes.”
Admin Terminal Connection
Run HyperTerminal§ or a similar terminal emulator on your PC. The
steps below are illustrative of HyperTerminal§. Other terminals will
require different procedures.
1. Use the serial cable provided with the 7110/7115 to connect the
device’s serial port (the left-hand serial port labeled “Console”)
to the serial port of any terminal. (A PC running Windows
HyperTerminal§ is used here as an example.)
Figure 2-3: Front Panel Connectors and LEDs
Network Link
(RJ45)
Server Link
(RJ45)
Network Link
(green)
Server Link
(green)
Console
Power Error Overload Activity
(green) (red) (amber) (green)
Inline
(green)
Aux Console