Filter
Top Products
C H A P T E R 4 Scenario 2—Multiple Servers
4-5
Scenario 2—Multiple Servers
This scenario shows how to configure two or more servers.
Figure 4-2: Single 7110/7115, Multiple Server Installation
Procedure for Scenario 2
1. Perform the installation as described in Chapter 2. Access the
7115 command prompt.
2. Acquire the appropriate keys and certificates following the
procedure in the Keys and Certificates section in Chapter 3.
3. Create a mapping for Server 1. Use the create map command to
specify the server IP address, ports, and keyID.
Intel 7115>create map
Server IP: 10.1.1.30
SSL (network) port [443]: <Enter>
Cleartext (server) port [80]: <Enter>
KeyID to use for mapping: myserver
Server 1
10.1.1.30
Server 2
10.1.1.31
Hub/switch
Router
Intel® NetStructure™ 7110/7115
e-Commerce Accelerator